Six Way 5G RF Power Combiner

The Six Way 5G RF Power Combiner is used to combine signals of multiple cellular networks into an indoor distribution system. With a combiner, a set of indoor distribution system can work for networks of different standards at the same time. It is mainly used for indoor 5G/4G/3G/2G wireless network coverage of buildings, subways, high-speed rails, tunnels, etc.

ꄴPrevious: 2T2R 5G Cellular Signal Boosters

ꄲNext: F/A Band Uplink Interference Suppression Filter

Introduction

The RF Power Combiner is used to combine signals of multiple cellular networks into an indoor distribution system. With a combiner, a set of indoor distribution system can work for networks of different standards at the same time. It is mainly used for indoor 5G/4G/3G/2G wireless network coverage of buildings, subways, high-speed rails, tunnels, etc.

The RF combiner is characterized by:

1.High protection level (IP65)

2.Small body size (252mm*186mm*47mm)

3.High Q-value, small insertion loss, good temperature stability

Specification

Item	Parameters
Channel	GSM	DCS	TD F&A	TD E	TDD	RFID800
Frequency (MHz)	890-954	1710-1830	1885-2025	2300-2400	2515-2675	840-845
Insertion Loss	≤0.8
Gain Flatness	≤0.6dB
Channel Isolation	≥80dB
Out-of-band Suppression/dB	D band≥60@2400-2484MHz
VSWR	≤1.3
Input Resistance (Ω)	50
Input Power (W)	≥ 300 (mean)
Third-order Intermodulation	≤ -14 5 dB c@ 43 dB m×2
Fifth-order Intermodulation	≤ -15 5 dB c@ 43 dB m×2
Operating Temperature (℃)	-2 0～ + 6 5
Port Type	Input: N female, output: DIN
Dimension (mm)	252mm186mm47mm（Not including screw height）
Protection Level	IP65

PRODUCTS

넳 넲